LED Street Light for Urban & Commercial Road Lighting

Introduction – The Hidden Costs of Cheap Street Lighting

When municipalities, property developers, and facility managers select street lights, the upfront price often overshadows long-term considerations. But the true cost of a street light extends far beyond its purchase price – and cheap alternatives can become a financial drain within months.

Low luminous efficacy – A budget street light might only deliver 70-90 lumens per watt, requiring more fixtures to meet illumination standards. This increases both initial procurement and ongoing electricity costs.

Poor heat dissipation – Plastic or thin aluminum housings trap heat, causing LED chips to overheat. The result? Lumen depreciation accelerates, and fixtures that should last 50,000 hours fail within 2–3 years.

Inadequate weather protection – Without proper IP sealing, moisture enters the housing, corroding components and causing flickering or complete failure after the first rainy season.

Our UT-60-06400 series was engineered to solve these problems. With 110–120LM/W high efficacy, die-cast aluminum housing, and IP65 waterproof rating, these street lights deliver professional-grade performance that reduces energy consumption and minimizes maintenance over decades of service.

Key Features That Solve Real-World Street Lighting Problems

1. High Luminous Efficacy – Up to 120LM/W Saves Energy and Money

The UT-60-06400 series achieves 110–120 lumens per watt, significantly higher than standard street lights. This means:

• A UT-series street light produces the same illumination as a higher-wattage standard fixture while consuming less power.
• Lower energy consumption translates directly to reduced electricity bills – critical for municipalities with thousands of street lights.
• Fewer fixtures are needed to meet road lighting standards, reducing pole spacing and installation costs.

For a 1km stretch of road, using high-efficacy lights can reduce energy costs by 20–30% annually compared to conventional alternatives.

2. Die-Cast Aluminum Housing – Superior Heat Management and Durability

Heat is the leading cause of early LED failure. The UT-60-06400 series uses a die-cast aluminum housing that acts as an integrated heat sink, efficiently drawing heat away from the LED chips and driver.

Benefits include:

• Lower junction temperature – LEDs stay cooler, maintaining stable light output
• Extended lifespan – Rated for 50,000+ hours of continuous operation
• No yellowing or warping – Unlike plastic, aluminum does not degrade under UV exposure
• Corrosion resistance – Suitable for coastal and industrial environments

3. IP65 Waterproof Rating – Reliable in All Weather

Outdoor street lights face rain, snow, dust, and humidity year-round. The UT-60-06400 series is rated IP65, meaning:

• Dust-tight – No ingress of dust or particulates
• Protected against water jets – Withstands heavy rain and hose-down cleaning from any direction

This weather resistance reduces maintenance frequency and ensures continuous illumination when it's needed most.

4. Wide Voltage Compatibility

The series uses a non-isolated narrow voltage design suitable for stable power grids. For regions with wide voltage fluctuations, discuss alternatives with our technical team.

5. 4 Power Options – One Family, Complete Coverage

The UT-60-06400 series offers four power levels from 50W to 200W, allowing you to standardize on one product family across large-scale projects, simplifying inventory and maintenance while reducing project complexity.

Complete UT-60-06400 Series Specifications

Color Temperature: 6500K (Cool White/Daylight) – ideal for outdoor road lighting where high visibility and color contrast are required.

Lifespan: 50,000+ hours (reduces maintenance and replacement costs)

Which UT-60-06400 Model is Right for Your Project?

For road lighting, the selection of the correct model depends on pole spacing, mounting height (typically 8–14 meters for major roads), and required lux levels. Our technical team can provide photometric calculations for your specific project.

Frequently Asked Questions

Q: Are these street lights suitable for highway lighting?
Yes – the larger models (150W and 200W) provide sufficient lumens for highway applications. Combined with IP65 weather protection and 50,000-hour lifespan, they are well-suited for critical infrastructure projects.

Q: What is the beam angle?
The SMD2835 chips provide a wide distribution suitable for area and road lighting. For specific beam angle requirements, please consult our technical team.

Q: Can these lights withstand coastal environments?
The die-cast aluminum housing offers good corrosion resistance. For harsh coastal conditions, additional surface treatment options are available on request.

Q: What is the warranty period?
We provide a 2–3 year warranty against manufacturing defects. Please inquire for specific terms.

Conclusion – Professional Street Lighting That Delivers

The UT-60-06400 series represents a comprehensive solution to the common frustrations of outdoor street lighting – low efficacy, overheating, moisture ingress, and short lifespan. With high-output LED chips, die-cast aluminum construction, IP65 weatherproofing, and four power options, this series delivers professional-grade performance for municipal, commercial, and residential road lighting applications.

Stop investing in street lights that fail prematurely or consume excessive energy. Choose the UT-60-06400 series for reliable, efficient, and long-lasting outdoor illumination.

Ready to work with a trusted partner?
Contact OKELI Team:
📧 sale12@neworb.com
🌐 https://www.okelilamp.com/led-lights-okeli-lighting/
📞 Whatsapp: +86 19129099652